Fuel Injection System
8.26
Pro g ram Select Menu
The screen shown is the Program Select Menu. It’s
displayed as soon as the DI software starts.
Option “1”: FFI Diagnostics
This screen allows you to retrieve stored Service
Codes from the EMM, helps you diagnose problems
with the engine that are causing a Service Code, and
allows you to clear stored Service Codes.
For testing purposes, allows you to:
S Activate any fuel injector
S Fire any ignition coil
S Test the Fuel Pump
S Timing Verification
S EMM Information Screen
S RPM Profile
Option “2”: Service Utilities
(Reports / Injectors / EMM)
Allows you to retrieve information on the EMM and in-
jectors, replace injectors or the EMM, and real-time en-
gine monitoring.
For testing purposes, allows you to:
S View current and past service reports
S View injector information and replace injec-
tors
S Service the EMM
S Real-time engine monitoring
Option “3”: Exit Program
Depending on how you installed the software, will re-
turn you to either MS DOS, or the Windowst Desktop.
Program Select Menu
1) FFI DIAGNOSTICS
2) SERVICE UTILITIES
(REPORTS / INJECTORS / EMM)
3) EXIT PROGRAM
To Next Page
Loading...