Fuel Injection System
8.37
2) Save Curren t EMM Report
T ype 2 from the Service Report Menu to save a report
about the engine you are connected to. You will be
asked to enter a file name or select a file name from a
list.
NOTE: Polaris recommends for simplicity, you enter
the universal manufacture ID and the serial number for
each watercraft you are connected to.
An example would be: PLE12345. The file name
can be no longer than eight characters and contain
no special characters. After typing the file name, hit
²ENTER².
3) Print
Type ²3² on the Service Report Menu to print a report
about the engine you are currently connected to. After
typing in the file name, hit ²ENTER² key. Press the
²ESC² key to return to the Service Report Menu.
4) View Saved Report
Type ²4² on the Service Report Menu to a view a pre-
viously saved report. You will be asked to enter a file
name or select a file name from a list. Use the ²Arrow²
keys to move through the list of files. This option will al-
low you to view files about an engine that is not current-
ly connected to your laptop. Press the ²ESC² to return
to the Service Report Menu.
5) Print Saved Report
Type ²5² on the Service Report Menu to print a pre-
viously saved report. You will be asked to enter a file
name or select a file name from a list. Use this option
to print information on an engine that is not currently
connected to your laptop. Press the ²ESC² key to re-
turn to the Service Report Menu.
6) Return to Service Utilities Menu
Type ²6² on the Service Report Menu to return to the
Service Utilities Menu.
File name:
PLE12345
PLE54321
To Next Page
Loading...