54
Accessing, Sending, and
Broadcasting Messages
You can access, send, and broadcast a variety of message types.
Note: Your phone may not support all of the features described in this section. Check with your system
administrator to find out which features are available on your phone.
Accessing Voicemail
Your phone indicates when you have new voicemail in the following ways:
The message icon displays with the number of new messages:
3 On the Home screen.
3 In the status bar.
3 Next to the phone line on the Lines screen.
The message waiting indicator LED flashes.
The phone plays an audible alert.
Note: Contact your system administrator or service provider for information on setting or
changing your voicemail greeting.
Access Voicemail Messages
Check your voicemail in the Message Center on your phone.
Note: For information on remotely accessing your voicemail, contact your system administrator or
service provider.
Procedure
1. Go to Messages.
2. Select Message Center.
3. If you have multiple lines on your phone, select the line that has the new message.
4. From the Messages screen, select Connect and follow the prompts to access your messages.
Remove the Message Alert
If you are not ready to listen to your messages when you receive new messages, you can temporarily
remove the message alert.
Procedure
1. Go to Messages.
2. Select Message Center.
3. Select Clear.
All message indicators are removed for approximately one to two hours.
To Next Page
Loading...
Need help?
General
