Poly E Series - Page 57

57
Update Paging Group Subscriptions
By default, you are subscribed to Paging Groups 1, 24, and 25. This means that you can send pages
to and receive pages sent from these groups. You can change which groups you are subscribed to.
However, you cannot disable your subscriptions to Paging Groups 24 and 25.
Procedure
1. Go to Settings  Basic  Preferences  Paging/PTT Configuration.
2. Select Group Paging  Group Subscriptions.
3. From the Group Subscriptions screen, select the group you want to subscribe to and select Yes.
Enable Pages to Play during Active Calls
The Accept While Busy setting determines what happens when you are in a call and receive a page.
This setting is disabled by default. When disabled, the incoming page is held in a pending state, it does
not disrupt the call, and you cannot hear the page.
When you enable the Accept While Busy setting, a page interrupts calls and you hear the audio of the
call and the page.
Procedure
1. Go to Settings  Basic  Preferences  Paging/PTT Configuration.
2. Select Group Paging  Accept While Busy and select Enable or Disable.