Polycom 331 User Manual

24
Setting up the Base
Before using the Desk Phone, you must attach the base. The base
has two pins: one that retracts and one that is stationary. These
pins attach the base to the phone. Attaching the Base
Attach the phone base to the phone in one of the following ways:
• As a desk mount
• As a wall mount
To attach the base as a desk mount:
1. Place all cords in the recessed area above the modular jacks.

Polycom 331 Specifications

General

Lines	2
Protocol	SIP
Speakerphone	Full-duplex
Type	IP Phone
Display	102 x 33 pixel graphical LCD
Network	10/100 Ethernet
Power over Ethernet	Yes (IEEE 802.3af)
Audio	G.711, G.729
Ethernet Ports	2
Power	48V DC
Headset Port	Dedicated RJ-9 headset port