Polycom 331 User Manual

34
6. PressPress
7. Enter the number of the party to whom you want to divert the call.
8. Press the Ok or Cancel soft keys to accept or cancel changes.
9. Scroll down to the Auto Divert eld.
10. Press , and then to change between Disabled and En-
abled.
11. Press the Ok or Cancel soft keys to accept or cancel changes.
12. Press repeatedly to return to the idle display.
Ending a Call
To end a call:
Do one of the following steps:
Press the EndCall soft key.
Replace the handset.
Press if in Hands-free Speakerphone Mode, or if in
Headset Mode
Placing a call
You may dial 7, 10, 11-digit phone numbers or international phone
numbers. Additionally, you my call any other 3-digit extension. You
may place a call in the following ways:
• Using the handset
• Using the speakerphone
• Using the headset

Polycom 331 Specifications

General

Lines	2
Protocol	SIP
Speakerphone	Full-duplex
Type	IP Phone
Display	102 x 33 pixel graphical LCD
Network	10/100 Ethernet
Power over Ethernet	Yes (IEEE 802.3af)
Audio	G.711, G.729
Ethernet Ports	2
Power	48V DC
Headset Port	Dedicated RJ-9 headset port