36
1. With the optional headset connected, press
, , or the NewCall soft key to
obtain dial tone.
2. Press .
3. Dial the desired number using the dial pad.
4. With the optional headset connected, dial the desired number
using the dial pad.
OR
1. Press . You will hear a dial tone.
2. Enter the desired number
To place a call using the Dial key:
Do one of the following steps:
1. Press the Callers soft key to view the Receive Call list.
2. Press to view the Placed Call list.
OR
1. Use and to scroll through the list to nd the contact.
2. Press to complete the call.
Note
You do NOT need to dial 9 to make a phone call.
Managing Call Lists
A list of up to four current calls is maintained. You can scroll
through this list using the and . Calls are ordered using
the following priorities: active, alerting, then held. Calls with the
same priorities are ordered oldest rst. If there are no current
calls, this list is empty.
Local lists of incoming - both missed and received calls - and
To Next Page
Loading...
Need help?
General
