System Flags
Polycom, Inc. 196
ISDN_IDLE_CODE_T1 The Idle code (silent), transmitted on the ISDN-video
T1 B channels, when there is no transmission on the
channels.
Default value: 0x13
HW No
ISDN_NUM_OF DIGITS When using ISDN-video overlap sending dialing
mode, this field holds the number of digits to be
received by the MCU.
Default value: 9
HW No
ISDN_RESOURCE_POLICY Determines how the ISDN-video B-channels within
configured spans are allocated.
The robustness of the ISDN-video network can be
improved by allocating channels evenly (load
balancing) among the spans, minimizing the effect of
channel loss resulting from the malfunction of a
single span.
Default value: LOAD_BALANCE
Set the flag value to:
• LOAD_BALANCE - To allocate channels evenly
among all configured spans.
• FILL_FROM_FIRST_CONFIGURED_SPAN -
To allocate all channels on the first configured
span before allocating channels on other spans.
• FILL_FROM_LAST_CONFIGURED_SPAN -
To allocate all channels on the last configured
span before allocating channels on other spans.
HW No
ITP_CERTIFICATION When set to NO (default), this flag disables the
telepresence features in the Conference Profile.
Set the flag to YES to enable the telepresence
features in the Conference Profile (provided that the
appropriate license is installed).
Default value: NO
Possible values: YES/NO
HW/VE Yes
General System Flags
Flag Name Description Platform Add?
To Next Page
Loading...
