System Location, Appearance, and Tones
7 - 11
4. Click Utilities > Screen Saver, and paste a feed URL into the News Feed
field.
5. Select a stream content, click Submit, and close the stream content
window.
6. Click Update.
Adding a Screen Saver Logo
You can customize the VSX system to display your own logo instead of the
Polycom logo.
To upload a screen saver logo:
1. On a computer, open a web browser.
2. In the browser address line, enter the system’s IP address, for example,
http://10.11.12.13
, to go to the system’s web interface.
3. Enter the user name and remote access password, if a password has been
established.
4. Click Utilities > Screen Saver, click Next, and follow the onscreen
instructions for uploading a logo file.
Changing the Screen Saver Wait Time
To change the screen saver wait time:
1. Go to System > Admin Settings > General Settings > System Settings >
Appearance.
2. Configure the screen saver wait time to specify how long the system
remains awake during periods of inactivity. The default is 3 minutes.
Setting this option to Off prevents the system from going to sleep.
To Next Page
Loading...
