Polycom VSX 7000

Statistics and Diagnostics
11 - 5
Audio
Restart System
Diagnostic Screen Description
Speaker Test Tests the audio cable connections. A 473 Hz audio
tone indicates that the local audio connections are
correct.
If you run the test from the system during a call, the
far site will also hear the tone.
If you run the test from the system’s web interface
during a call, the people at the site you are testing will
hear the tone, but you will not.
Audio Meter Measures the strength of audio signals from the
system’s microphone.
• To check the microphone, speak into the
microphone.
• To check far-site audio, ask a participant at the far
site to speak or call a phone in the far-site room to
hear it ring.
The audio meter should register between 0 and
15 dB.
Diagnostic Screen Description
Restart System Cycles power to the system.
When you reset the system using the remote control,
the system’s user interface allows you to:
• Keep your system settings (such as system name
and network configuration) or restore factory
settings.
• Keep or delete the directory stored on the system.
You may wish to download the CDR and CDR archive
before you reset the system. See Call Detail Report
(CDR) on page 11-6.