Administrator’s Guide for the VSX Series
5 - 12
Via a Telnet Session
Closed captioners can provide captions from inside the conference room, or
from a remote location, by entering captions via a Telnet session, as shown in
the following diagram.
To supply closed captions for a conference via a Telnet session:
1. On a computer, open a command line interface.
2. Start a Telnet session using the VSX system IP address and port 24, for
example,
telnet 10.11.12.13 24
.
3. Enter the command
cc
to start captioning.
4. Press Enter to send the text.
5. To stop sending closed captions, enter Ctrl-z.
VSX System
LAN
Telnet session
port
LAN
To Next Page
Loading...
