Polycom VSX 7000

Regulatory Notices - 1
Regulatory Notices
Important Safeguards
Read and understand the following instructions before using the system:
• Close supervision is necessary when the system is used by or near children. Do not leave unattended while in
use.
• Only use electrical extension cords with a current rating at least equal to that of the system.
• Always disconnect the system from power before cleaning and servicing and when not in use.
• Do not spray liquids directly onto the system when cleaning. Always apply the liquid first to a static free cloth.
• Do not immerse the system in any liquid or place any liquids on it.
• Do not disassemble this system. To reduce the risk of shock and to maintain the warranty on the system, a
qualified technician must perform service or repair work.
• Connect this appliance to a grounded outlet.
• Only connect the system to surge protected power outlets.
• Keep ventilation openings free of any obstructions.
• If the system or any accessories are installed in an enclosed space such as a cabinet, ensure that the air
temperature in the enclosure does not exceed 40°C (104° F). You may need to provide forced cooling to keep
the equipment within its operating temperature range.
SAVE THESE INSTRUCTIONS.
Electrical Specifications
Polycom VSX 3000,
VSX 3000A System: 100-240VAC, 47-63Hz, 1.9A, 80W max
Polycom VSX 5000 System: (Potrans) 100-240VAC, 50-60Hz, 1.8A
(Ault power supply) 100-240VAC, 50-60Hz, 1.3A
Polycom VSX 6000,
VSX 6000A System: (Potrars) 100-240VAC, 50-60Hz, 1.8A
(Ault power supply) 100-240VAC, 50-60Hz, 1.3A
Polycom VSX 7000s System: (Subwoofer) 100-240VAC, 50/60Hz, 1.1A
Polycom VSX 7000e System: 90-250VAC, 50/60Hz, 4A
Polycom VSX 8000 System: 90-250VAC, 50/60Hz, 4A