Polycom VSX 7000

10 - 1
10
Control Devices
Configuring Remote Control Behavior
You can customize the behavior of the remote control to support the users’
environment.
To configure remote control behavior:
1. Go to System > Admin Settings > General Settings > System Settings >
Remote Control.
2. Configure these settings:
Setting Description
Keypad Audio
Confirmation
Specifies whether to play a voice confirmation of numbers
selected with the remote control.
Remote
Control
Keypad
Specifies whether pressing remote control keypad buttons
moves the camera to presets or generates DTMF tones. If this
is set to Presets, users can generate DTMF tones by pressing
on the remote control while on a video screen.
Snap Button
Option
Specifies alternative uses for the
Snap button on the
remote control. Choose from Mute Speakers, Calendar,
Recent Calls, System Info, Call Statistics, or Off.
Chinese Virtual
Keyboard
Specifies the type of onscreen keyboard to display for
Simplified Chinese. This setting is only available when the
system’s Language is set to Simplified Chinese.
Use
Non-Polycom
Remote
Configures the system to accept input from a programmable,
non-Polycom remote control. In most cases the Polycom
remote works as designed, even when this feature is enabled.
However, try disabling this feature if you experience difficulty
with the Polycom remote. For more information about VSX
system IR codes, refer to the Integrator Reference Manual for
the VSX Series.