iv
suitable settings
frequency range
4-2
measurement range 4-2
optimal stand-off distances 4-6
stand-off distance and visibility maximum 4-5
stand-off distances with
CoherenceOptimizer
4-7
tracking filter 4-3
switch off, PSV 5-1
switch on, PSV 5-1
SYNC
jack on the front-end
3-3
Spezifikationen 7-2
system cabinet
assembly
3-15
specifications 7-22
system components
decoders
2-3
signal flow, principle 2-2
summary 2-1
system summary
introduction
2-1
setup and properties 2-3
T
technical specifications, standards applied 7-1
TOP, connection on junction box 3-5
tracking filter 4-3
TRIG IN
jack on the front-end
3-3
specifications 7-2
troubleshooting
approach
6-1
general tests 6-2
pilot laser 6-4
problems with the laser 6-3
problems with the measurement signal 6-4
U
unpacking 3-1
use, intended 1-2
user qualification 1-2
V
velocity acquisition, theory B-1
VIDEO
network connection on front-end
3-5
network connection on PC 3-7
video camera, external
assembly
A-4
cabling A-5
control elements (standard lens) A-2
control elements (zoom lens) A-3
introduction A-1
specifications A-6
W
warning label for assembly, on the scanning
head
3-11
warning labels
laser warning labels
1-5
,
1-6
warning notices
cleaning
1-3
electrical safety 1-10
off-system components 1-3