1-8
1 Safety Information
1.5.3 Applicable Standards and Directives
The instrument complies with the electrical protection class 1 in accordance
with the EU Directive 2014/35/EU (Low Voltage Directive). That means when
the instrument is used as intended and connected to the power supply
correctly, exposure to electric current is prevented by the closed, grounded
metal housing.
The instrument is subjected to EU directive 2014/30/EU (EMC directive) and
therefore conforms with the limits for emission and immunity specified in the
standards this is based on. With the CE mark Polytec confirms that the
instrument has been tested successfully.
To Next Page
Loading...
