3
• Keep loose items such as long hair, clothing, jewelry, away from the cutter.
• Don't put anything except print media inside the cutter.
• Turn off power of printer if you notice abnormality with the cutting process and alert a
qualified technician to resolve the issue.
• Never cut a print media which exceeds the maximum operating conditions of the cutter.
• Not every cutter model is designed to be able to cut through adhesive. Use only the dedicated
cutters to cut through adhesive materials. Even so, regular cleaning is required to remove the
adhesive built up on the blades over time to prevent cutter jam.
• Routine inspection and maintenance are required to be performed by a qualified technician to
keep the cutter in good working conditions.
To Next Page
Loading...
