Postek G2000e - Operating the Printer and Configuration Settings; Basic Printer Controls and Indicators

G2000e/G3000e/G6000e User’s Manual Chapter 3: Operations and Settings
20
Chapter 3: Operations and Settings
3.1 Basic Operations
3.1.1 Power Switch
The power switch is on the rear left side of the printer. The symbols on the switch are defined as
follows:
━ - ON
〇 - OFF
3.1.2 The Front Panel
The Front Panel of the Ge Series label printer consists of:
• Three LED Indicators: [MEDIA], [READY] and [RIBBON]
• Three multi-function buttons: [PAUSE/Self Test], [FEED/Calibration] and [CANCEL/ Reset]
• A 128 x 64 graphic dot matrix LCD display
Figure 3-1 Front Panel
LED Indicator
The LED indicator on the front of the printer shows the different states that the printer is in, please
refer to Table 3-1 below for details.