To Next PageTo Next Page
Need help?Do you have a question about the PowerLogic EGX100 and is the answer not in the manual?
General| Brand | PowerLogic |
|---|---|
| Model | EGX100 |
| Category | Gateway |
| Language | English |
Lists the Ethernet protocols supported by the EGX device.
Provides links to download documentation and firmware files.
Step-by-step guide to logging into the EGX via a web browser.
Instructions on how to properly log out of the EGX configuration session.
Overview of the EGX's configuration web pages.
Overview of the EGX's diagnostic web pages.
Configure EGX network communication settings like IP address and subnet mask.
How the EGX handles duplicate IP address conflicts using ARP.
Configure serial port settings such as mode, interface, and baud rate.
Manages serial slave devices connected to the EGX.
Configures the device list when the EGX is in Master mode.
Configures the device list when the EGX is in Slave mode.
Manage user accounts, passwords, and group access to EGX web pages.
Define access levels for user groups to different EGX web pages.
Specify which Modbus TCP/IP clients can access serial slave devices.
Configure SNMP settings for network management and diagnostics.
View network and device statistics for troubleshooting and monitoring.
Explains the meaning of various statistics displayed for Ethernet, Modbus TCP/IP, and Serial Port.
Read specific data registers from connected serial devices.
How to locate and identify the current firmware version installed on the EGX.
Instructions on where to download new firmware files for the EGX.
Step-by-step guide to update the EGX firmware using FTP.
