LED Chart
8
All circular back illuminated buttons provide status in-
formation about the input and the output section of each
channel.
The center of each button provides status information
about the output signal.
Center color
OUTPUT indicators
color status
blue Channel ready
orange MUTE
yellow Limiter engaged
The ring of each button provides status information
about the input signal.
Ring color
INPUT indicators
color status
white
blinking
(center blue)
Input signal presence
red Input signal clipping
Channel fault and Armonía callback are associated to
the following LED signals.
color status
red blinking
(center and ring)
Channel fault
blinking / all channels
(center and ring)
Unit answering to
Armonía callback
Only the central button light when the system is in
standby mode:
Ring color
CENTRAL button
color status
white
blinking
(all LEDs off)
System powered
Standby mode
4 | X Series | User guide
To Next Page
Loading...
