Networking
14 13
The built-in networking capability of the X Series al-
lows full remote management of multiple devices through
Armonía Pro Audio Suite™ and signal routing using Dante™
communication protocol.
Furthermore, any X Series amplier platform provide a
local WiFi network that allow the user to monitor the unit
and make basic settings.
For WiFi connectivity no dedicated application is needed
other than a supported web browser on your mobile device:
f Safari on iOS based devices;
f Chrome on Android and Windows based devices.
14 : 1.WiFi connectivity
Follow this procedure to activate the WiFi connection
and remotely access your Powersoft X Series amplier
platform.
1. Switch on the amplier by holding down the central
button on the front panel;
2. Press the leftmost button in the front panel: the button
will light up and the system will establish a new local
WiFi network whose SSID is in the form:
Powersoft-MODELNAME-SERIAL
(e.g. Powersoft-X8-71520)
3. Access your mobile device and edit the WiFi congu-
ration;
4. Hang the WiFi network with the right SSID;
5. Insert the following WiFi encryption password:
0123456789
6. Open the web browser and type the following IP ad-
dress in the address bar:
192. 168 . 0 .1
7. The system will push the user interface to the browser:
now you can start managing your X Series amplier
platform.
8. For simple recall and operation with the interface, we
suggest to bookmark it on the home screen of your
mobile device; for example, in iOS device click on the
share icon and select “Add to Home Screen” when the
interface has been completely loaded.
9. Remember to switch the local WiFi network off when
monitoring and basic setup are no more necessary:
press the leftmost button in the front panel in order to
switch off the WiFi.
Networking | 15
To Next Page
Loading...
