powersoft X4 - Page 4

ii | X Series | User guide
14 : 4.Dante™ networking 17
14 : 4.1. Redundant network configuration 17
14 : 4.2. Dante™ unsupported network configurations 17
15: User interfaces 18
15 : 1.Armonía Pro Audio Suite™ 18
15 : 2.X Series Control Panel application 18
15 : 3.Signal routing and DSP architecture 18
15 : 3.1. Signal processing 18
15 : 4.Processing architecture 20
15 : 4.1. Input source selection 20
15 : 4.2. Matrix 21
15 : 4.3. Advanced processing 21
15 : 4.4. Speaker processing 21
15 : 4.5. Speaker routing 21
15 : 4.6. Output processing 21
15 : 5.Purposed workflow 22
15 : 5.1. Loudspeaker layout and output processing 22
15 : 5.2. Routing path and levels 23
15 : 5.3. Signal source and processing 23
16: System and signal protections 24
16 : 1.Power supply protections 24
16 : 1.1. Primary AC mains overcurrent protection 24
16 : 1.2. Primary AC mains overvoltage protection 24
16 : 1.3. Primary thermal protection 24
16 : 2.Amplifier protections 24
16 : 2.1. Harmful signal protections 24
16 : 2.2. Output short circuit 24
16 : 2.3. High frequency stationary loud signals 24
16 : 2.4. DC fault protection 24
17: Warranty and assistance 25
17 : 1.Warranty 25
17 : 1.1. Product warranty 25
17 : 1.2. Return of Goods 25
17 : 1.3. Repair or replacement 25
17 : 1.4. Cost and responsibility of transport 25
17 : 2.Assistance 25
18: Specifications 26