Microwave Seals and Gaskets
The oven equipped with seals and gaskets to eliminate excessive microwave exposure. These seals
need to be inspected at the time of service by the field technician for proper functionality.
Proper leak testing is performed with a quality test meter designed to sense at 2.45Ghz frequency. A
higher quality meter with an analog dial or digital display is highly recommended to reduce any false
readings. Lees expensive meters with only an audible alarm are not recommended. The meter needs
to register readings of less than 1.0mW/cm2 and greater than 5.0mW/cm2 for proper documentation
by the field technician.
The Copa Express oven utilizes a door choke design to efficiently seal the microwaves in the oven
cavity. The technician needs to inspect the door surfaces for debris build up and remove any build up
that may have accumulated between the door and the oven cavity surfaces.
The slots or openings of door choke must also be open and free of any food debris to operate at top
performance.
To Next Page
Loading...
