Precision Filters, Inc. 28000 Signal Conditioning System Installation Instructions
Rev. B
28000 System Installation
Page 21
Table 4 Approximate Shipping and Unpacked Weights for 28000 Mainframes
System Shipping Weight Unpacked Mainframe Weight
28002-M5 16.75 lbs. (7.6 kg) 7.75 lbs. (3.5 kg)
28004-M3/M5 45 lbs. (16.8 kg) 30 lbs. (11.2 kg)
28008-M3/M5 48 lbs. (17.92 kg) 34 lbs. (12.69 kg)
28016-M3 85 lbs. (31.73 kg) 61 lbs. (22.77 kg)
28016-M5 85 lbs. (31.73 kg) 61 lbs. (22.77 kg)
2.3.1 Shipping Container
Inspect the shipping containers immediately upon receipt for evidence of mishandling during
transit. If a shipping container has been damaged in any way, have the carrier’s agent present
when the equipment is unpacked. If the equipment is damaged, le a claim with the carrier
and forward a copy to Precision Filters.
Retain the shipping container and packing material for the carrier’s inspection or for reuse if
the unit requires servicing or repair.
2.3.2 Mainframe Inspection
Before shipment mainframes, power supplies, and BIF cards are free of electrical and
mechanical defects and are fully tested and burned in.
CAUTION
To lift the mainframe, securely support the frame in the front and the
rear of the unit. Do not lift the mainframe using only the front panel
handles.
Note:
The handles on the mainframe’s front panel are designed to aid in sliding a rack-
mounted mainframe in and out of the rack for easy access to the back of the unit.
Check the system mainframe visually to ensure that there are no broken controls, handles,
or connectors and that the panel surfaces are free of dents and scratches. Examine the main-
frame’s interior for loose or damaged connectors, guides, or wiring.
To Next Page
Loading...