EFX 885, 835, 825
Service Manual 20039-166
Page 156
©2011 Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Procedure 10.12 Replacing the Stairarm Pedal
1. Loosen and remove the four screws that fasten the stairarm pedal onto the stairarm. Refer to Diagram
10.12.1.
2. Remove the stairarm pedal from the stairarm.
3. Set the replacement stairarm pedal at its mounting position on the stairarm.
4. Install and tighten the stairarm pedal mounting hardware removed in step 2.
Diagram 10.12.1 - Stairarm Pedal
Plastic
Spacer
Mounting
Screw
Pedal
Stairarm
To Next Page
Loading...
