Precor EFX 835 Service Manual

EFX 885, 835, 825
Service Manual 20039-166
Page 100
©2011 Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Procedure 6.3 P20 Setting Club Parameters
This procedure allows you to change the following club settings:
 Select Language
 Select Units of Measure
 Set Default Workout Time
 Set Max Workout Time
 Set Max Resistance
 Set Max Crossramp
 Set Max Pause Time
 Set Cool Down Time
Procedure:
1. Use the:
 INPUT UP and INPUT DOWN keys to move though the different club settings.
 GO key to select the setting.
 WORKOUTS/ PROGRAMS key to back up one level until reaching Banner state.
 PAUSE/RESET key to return the unit to Banner state from anywhere in the menus.
Club Settings Menu - Table
Setting
Type
Action
Description
Set Language
At the Banner press PAUSE/RESET,
ENTER, INPUT UP,
WORKOUTS/PROGRAMS, ENTER,
INPUT UP, and ENTER keys
sequentially.
SET LANGUAGE will be displayed.
Press the GO key to select the setting.
Available choices of languages will be displayed.
The INPUT keys will allow scrolling through the available languages.
Press the WORKOUTS/PROGRAMS
key to exit Set Language.
Set Unit of
Measure
Press the  key to go to the next
setting.
SET UNIT OF MEASURE will scroll across the display.
Press the GO key to select setting.
Use the INPUT UP and INPUT DOWN keys to toggle between U.S (miles per
hour) and METRIC (kilometers per hour).
Press the WORKOUTS/PROGRAMS
key to exit Set Units of Measure.
Set Default
Workout Time
Press the  key to go to the next
setting.
SET DEFAULT WORKOUT TIME will scroll across the display
Press the GO key to select the Default
Workout Time.
Use INPUT UP or INPUT DOWN key to toggle between ON and OFF.
When set to ON, 30 will be displayed, use INPUT UP or INPUT DOWN  key
to increase or decrease time.
 When set to OFF, programs time will be the value in MAX Workout
Time

Precor EFX 835 Specifications

General

Brand	Precor
Model	EFX 835
Category	Elliptical Trainer
Language	English