EFX 885, 835, 825
Service Manual 20039-166
Page 6
©2011 Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Procedure 3.1 P80 Systems Settings
Procedure
1. The Welcome screen will be the first screen you see when you approach the P80 console. Press the Pause key
and continue holding it down while you double press (prior to 1.1 version software release) or single press (1.1
version or after software release) in sequential order an X configuration on the Volume and Channel key pad (
Channel Up, Volume Down, Volume Up, Channel Down). See Diagram 3.1.1. Release the Pause key when
done pressing the arrows. Note: The keypad X configuration sequence should be not faster than 1 second
between each key stroke. Any speed faster than 1 second may result in an unsuccessful access to the sign-in
screen.
2. The sign-in screen will be displayed. Type in the technician access code and then touch OK. The Settings menu
will be displayed. See Settings Table.
3. Use the System mode to configure settings in ways that benefit the users and the facility. Changes made to these
settings save to the fitness equipment. To select a Setting touch on an item in the Settings menu.
To Next Page
Loading...
Need help?
General
