Precor EFX 835 - P80 Display

EFX 885, 835, 825
Service Manual 20039-166
Page 21
©2011 Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Procedure 3.8 P80 Display
The display settings allow you to configure Measurement units, Standby Mode Delay, Time Zone, and Closed
Captioning.
1. Refer to Procedure 3.1 Settings, to access the Display menus.
2. To select a Display Settings touch on an item in the Display menu.
Display
Settings
Settings Options
Default Fault
Configure/View/Test
Language
 German
 English
 Spanish
 French
 Italian
 Dutch
 Russian
 Japanese
English
1. Touch Language
2. Touch on a radio button next to the desired
language, a dot will fill the radio button next to
the selection.
3. Touch OK or CANCEL to exit to the Display
menu.
Measurement Units
US Standard or Metric
US Standard
1. Touch Measurement Units
2. Touch on a radio button next to either US
Standard or Metric; a dot will fill the radio
button next to the selection.
3. Touch OK or CANCEL to exit to the Display
menu.
Standby Mode Delay
 5 Minutes
 15 Minutes
 30 Minutes
 60 Minutes
15 Minutes
1. Touch Standby Mode Delay.
2. Touch on a radio button next to the desired
delay time, a dot will then fill the radio button.
3. Touch OK or CANCEL to exit to the Display
menu.
Time Zone
GMT- 12 through GMT +
12
GMT 00-10
1. Touch Time Zone.
2. Touch on the radio button next to the desired
Time Zone, a dot will fill the radio button.
3. Touch OK or CANCEL to exit to the Display
menu.
Closed Captioning
ON/OFF
ON
1. Touch Closed Captioning
2. Touch on a radio button next to either ON/OFF,
a dot will fill the radio button next to the desired
selection.
3. Touch OK or CANCEL to exit to the Display
menu.
4. Touch  BACK to Settings. Procedure 3.1.