Precor EFX 835 Service Manual

EFX 885, 835, 825
Service Manual 20039-166
Page 18
©2011 Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Connectivity Set Up and Registration Procedure
1. Before you attempt to connect to the Precor Preva Server, check the status field and ensure that the Connected
is displayed. If the Status field shows Not Connected, you will need to diagnose your networking issue. Continue
with Step 2. If the Status Field shows Connected go to step 3. See Diagram 3.7.1
2. Either the Ethernet cable is not connected or there is a problem with the network connection. Check the
connection and then check the Status field again. If the Status field shows Connected continue with step 3. If the
Status field still shows Not Connected contact your IT expert.
Diagram 3.7.1
3. Check the IP Address field for a valid IP Address. If the IP Address is present continue with step 12. If the IP
Address is not present continue with step 4. See Diagram 3.7.2.
Diagram 3.7.2
IP Address Not Present
IP Address Present
Connected
Not Connected

Precor EFX 835 Specifications

General

Brand	Precor
Model	EFX 835
Category	Elliptical Trainer
Language	English