EFX 885, 835, 825
Service Manual 20039-166
Page 7
©2011 Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
4. Touch BACK to the Welcome screen.
System information
settings provide
basic information
including equipment
models and serial
numbers. Most of
these settings are
for informational
purposes only and
cannot be modified.
The Equipment
Usage settings
provide information
on individual usage
as well as
cumulative
equipment usage.
This information and
these settings are
accessible only to
administrators and
registered service
technicians.
See Procedure 3.3,
Equipment Usage
Use the System
Settings to test your
equipment and set
parameters that
benefit your users
and your facility. The
System Settings
menu is visible only
to administrators
and registered
service technicians.
See Procedure 3.4, System
Settings
Allows software to
be automatically
downloaded.
It is recommended
that this remain ON
at all times. Contact
Precor Customer
Service before this
setting is disabled.
Touch radio button next to
On to Enable Automatic
Downloads.
Default is ON
Touch radio button next to
Off to Disable Automatic
Downloads.
Used in advanced
troubleshooting.
Contact Precor
Customer Service
before changing
these settings.
Contact Precor Customer
Service
Available Updates
Or
No Available
Updates (Default)
The default is No
Available Updates.
When Software
Downloads is
enabled and a USB
flash drive is
installed that
contains a valid
software package,
Available Updates
will be displayed.
Touch next to any of the
available updates.
Touch View to see the
details of the update. Touch
BACK to updates list.
Touch Install to load the
update into the console.
See Procedure 3.5, Updating
Software.
To Next Page
Loading...
Need help?
General
