Precor EFX 835 - Page 24

EFX 885, 835, 825
Service Manual 20039-166
Page 24
©2011 Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
3. Touch  BACK to Settings. Procedure 3.1.
Workout Limits Settings Continued
Settings
Settings Options
Default Fault
Configure/View/Test
Resistance
Range
(RBK, UBK
only)
 Low
 Medium
 High
Medium
1. Touch Resistance Range
2. Touch on the radio button next to Low, Medium, or High, a
dot will fill the radio button next the selection.
3. Touch OK to exit to the Display menu.
Speed
Limit (TRM
only)
1-16 mph
16 mph
1. Touch Speed Limit
2. The on-screen keypad will appear, enter the desired
duration using the keypad.
3. Touch FINISH to exit to the Workout Limits screen.
Incline
Limit (TRM
only)
TRM 883 CrossRamp
incline range can be set to
0%-15%.
TRM 885 CrossRamp
incline range can be set to
0% to 15% Note: the
incline range is -3% to
15% but the limit can only
be set from 0% to 15%
15
1. Touch Incline Limit
2. The on-screen keypad will appear, enter the desired
duration using the keypad.
3. Touch FINISH to exit to the Workout Limits screen.
Auto Stop
(TRM
only)
 ON
 OFF
ON
1. Touch Auto Stop
2. Touch on a radio button next to either ON/OFF, a dot will
then fill the radio button next to the selection.
3. Touch OK to exit to the Workout Limits menu.
CrossRamp
Auto Level
(EFX only)
CrossRamp
Auto level
settings are
from 1% to
20%
1
1. Touch CrossRamp Auto Level
2. Touch the , to move auto level to the desired setting.
3. Touch OK to exit to the Workout Limits menu.