Precor EFX 835 - Cable Disconnection Steps

EFX 885, 835, 825
Service Manual 20039-166
Page 30
©2011 Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
3. Tilt the console forward (away from yourself) on the mounting hook. See Diagram 3.12.3
Diagram 3.12.3
4. Locate the coax connector and cut the wire tie that secures the coax connector to the console armor.
Disconnect the coax cable connector from the consoles flexible coax cable connector. See Diagram 3.12.4
Diagram 3.12.4
5. Disconnect the Ethernet cable, Data cable, the Power cable and the HR cable. See Diagram 3.11.5
Diagram 3.12.5
Coax Cable Connector
Coax Wire Tie
Console Flexible Coax
Cable Connector
Console Mounting Hook
Ethernet Cable
Power Cable
HR Cable
Data Cable
Ethernet Cable