Primedic DefiMonitor XD - Inserting Paper in the Printer

Preparatory measures before (initial) start-up
METRAX GmbH
DefiMonitor XD 21324 / GB / K05
45 / 116
5.6 Inserting paper in the printer
Procedure:
Press the release button above the paper compartment. The printer cover can now be
folded forward.
Prepare the roll of paper provided (remove adhesive strip, unroll approx. 5cm of paper)
Insert the roll of paper into the printer so that the side with the check pattern faces
upwards.
Close the cover.
Note
The cover is designed to spring out of its position without damage if great
pressure is exerted from the outside.