Primedic DefiMonitor XD - Parameter List Menu

Operating the PRIMEDIC™ DefiMonitor XD
METRAX GmbH
DefiMonitor XD 21324 / GB / K05
49 / 116
7.4 Parameter list menu
Page 1:
Alarm SpO
2
:
Lower limit, upper limit of SPO
2
alarm
Alarm SpO
2
:
[0 % / 25 % / 50 % / 75 % / 100 %]
Alarm ECG:
Lower limit, upper limit of ECG alarm
Alarm ECG:
[0 % / 25 % / 50 % / 75 % / 100 %]
Print form:
[ 1-channel / 3-channel / 6-channel]
Sensitivity
[5 mm/mV, 10mm/mV, optimal, 15mm/mV]
Derivation:
I II III aVL aVR aVF
Page 2:
Contrast:
from 60 to 180
Microphone:
[On / Off]
BLS information:
[On / Off]
HLW cycles:
Number can be selected 1-15
HLW sounds:
[0 % / 25 % / 50 % / 75 % / 100 %]
Volume:
[0 % / 25 % / 50 % / 75 % / 100 %]
Systole sound:
[0 % / 25 % / 50 % / 75 % / 100 %]
Page 3:
Auto print:
[On / Off]
Memo print-out:
Printing from printer memory, see chapter 7.9
Printing speed:
[25 mm/s / 50 mm/s]
Language:
(depends on installed language packages)
Time:
00:00 in 24 h format
Date:
in format DD/MM/YYYY
MMI-Test:
Interactive testing of operating membrane, see chapter 7.4.2
Page 4:
ARM SW:
Version number – Check sum Date (e.g. Jul. 11 2005)
DSP SW:
Version number – Check sum Date (e.g. Jul. 11 2005)
MSP SW:
Version number - check sum Date (e.g. Jul. 11 2005)
ULF:
Check sum 8-digit
Serial No.:
xxxxxxx