Prins VSI LPG - Ancillary Modules and Sensors

Copyright © Prins Autogassystemen B.V. 2013 Page 30
Electrical connections RPM module 091/0236
 Connect the brown wire of the RPM module to the brown wire nr.50 of the VSI wiring loom.
 Connect the purple-white wire of the RPM module to the purple-white wire nr.40 of the VSI wiring
loom.
 Connect the grey-white wire of the RPM module to the grey-white wire nr.13 of the VSI wiring loom.
 Connect the purple wire of the RPM module to the ignition coil driver wire.
RPM
module
ignition
coil -
rpm 40
ground 50
ignition + 13
VSI
computer
+
-
-
batteryignition +
solder