MEDIA
SETUP
(from page 66)
Print Intensity Print Speed Print Mode
0*
-15 to 15
4 ips*
1 ips to 10 ips
Transfer*
Direct
Media
Handling
Tear-Off Strip*
Peel-Off
Cut
Rewind
Continuous
Adv
Continuous
Standard*
Tear-Off
Tear Strip Full
Cut Strip
Label Length
6 inches*
1
0.1 to 99.0 inches
Label Width
4.1 inches *
1
0.1 to 4.1 inches
Ver Image
Shift
0.00 inches
1
-1.00 to X
2
Hor Image
Shift
0.00 inches*
1
-1.00 to 1.00
Orientation
Portrait*
Landscape
Inv. Portrait
Inv. Landscape
Tear Off
Adjust
0.00*
-1.00 to 0.20
Slew Speed
Ctrl
Automatic*
Manual
Print Direction
Head First*
Foot First
Label Wait
Time
0.1 seconds*
00.1 to 60.0 seconds
Label Missing
Fault Disable*
Fault Enable
Clip Page
Enable*
Disable
Fault Reprint
Disable*
Enable
Ribbon Low
Disable*
Enable
Units
In Inches*
In Millimeters
Set Label
Length
Manual*
Automatic
TOF Detect
Fault
3 Labels*
9 Labels
1 Label
TOF Adjust
Mode
Disable*
Enable
TOF Adjust
0.40 inches*
0.00 to 0.40 inches
4
Notes:
* = Factory Default
Italicized items are available when Admin User is set to Enable (in the PRINTER SETUP menu).
1
You can change the unit value from inches to millimeters under Units (in MEDIA SETUP) when Admin User is set to
Enable (in the PRINTER SETUP menu).
2
Based on the current value setting for Label Length (in the MEDIA SETUP menu) up to a maximum of 12.80 inches.
3
Maximum value depends on the amount of DRAM available for page memory, label length, and label width
see Appendix A, “Specifications”).
4
In increments of 0.01 inch.
5
This menu appears when Slew Speed Ctrl is set to Manual (in the MEDIA SETUP menu).
Slew Speed
5
4 ips*
1 to 10 ips
Auto Map
Select
Disable*
Enable
Auto Label
Width
4.1 inches*
1
00.1 to 4.1 inches
Num Auto
Labels
2 labels*
1 to 40 labels
3
Ticket Save
Mode
Disable*
Enable
To Next Page
Loading...
