Printronix SL5000 - Standard Features

Standard Features
23
Standard Features
• Emulations:
• Printronix LinePrinter Plus
®
(LP+). Provides direct compatibility with
Printronix P-Series printers, Epson FX-1050, Proprinter IIIXL, and
Serial Matrix Printers.
• Printronix IGP
®
/PGL
®
. Provides printer system commands for text,
barcodes, graphics, lines, and boxes.
• Printronix IGP
®
/VGL. Emulates the QMS Code V™ Version II
programming language to produce on-line forms, bar codes, and
alphanumeric text generation in both normal and high resolution.
• ZGL, TGL, IGL, STGL, DGL, MGL, and IEGL Interpreters: PPI/ZGL
(Zebra
®
), PPI/TGL (TEC
®
), PPI/IGL (Intermec
®
), PPI/STGL (SATO
®
),
PPI/DGL (Datamax
®
), PPI/MGL (Monarch
®
), and PPI/IEGL (IER
®
)
interpreters are powerful integration tools that allow the SL5000r/
T5000r to function in virtually all legacy ZPL, TEC, IPL, SATO, DPL™,
MPCL II
®
, and IER
®
application environments without requiring
modification to host data stream.
• Thermal Transfer and Direct Thermal Printing: On all printers (except
DT models, which print only in thermal mode).
• Standard Interfaces:
• Serial: RS-232
• USB 2.0 Universal Serial Bus
• Parallel: Centronics
®
-compatible parallel, IEEE
®
1284 compliant
parallel
NOTE: The interface cable needed to connect the printer to the host device is
supplied by the user.
• Bar Codes: Supports over 20 types of bar codes.
• Download: Fonts, forms, and graphics to printer memory.
• Resident Fonts: Letter Gothic Bold (#93779), Courier Bold (#93952),
CG Triumvirate Bold Condensed (#92250), OCR-A (#90993),
OCR-B (#91409), CG Triumverate (#92244), CG Triumverate Bold
(#92248), and CG Times (#92500).
• High Resolution Printhead: For sharp graphics and text.
• Label Taken Sensor: Detects removal of labels in Tear-Off mode (and in
Peel-Off mode when optional rewinder is installed).
• Tear-Off Mode: Positions the label at the tear-off position and detects its
removal before printing the next label.
• Tear-Off Strip Mode: Prints a specified number of labels and positions
the last label at the tear-off position.
• 32MB DRAM memory (fixed).
• 8MB Flash memory (SIMM).