236
Chapter 3
XOH-SMO Support
This option allows the user to disable reporting of XOH-SMO support in the
STM reply.
This feature has been added because some hosts will not send an IPDS
XOH-SMS to a printer that reports it is a Continuous Forms printer, and also
supports XOH-SMO.
• Enable. The printer reports that it has support for XOH-SMO.
• Disable. The printer does not report that it has support for XOH-SMO.
The factory default is Enable.
07 16 28 68
08 18 29 71
09 21 30 73
10 23 31 76
11 26 32 78
12 28 33 81
13 31 34 83
14 33 35 86
15 36 36 88
16 38 37 91
17 41 38 93
18 43 39 96
19 46 40 98
20 48
Table 7. Width Limit Table (continued)
To Next Page
Loading...
