92
Chapter 3 Overview
4. Before saving the modified configuration, you must delete the original
configuration if the Protect Configs. option is enabled.
a. Press the ↑ or ↓
key until the following message displays:
b. Press the
+ or − key to cycle through the options (1-8). When the
desired number displays, press the ↵ key to select it. The following
message displays:
Then, the following displays when it is deleted:
5. Save the new configuration as described in the “Saving A Configuration”
on page 88. Make sure you select the same number (e.g., Config. 1)
when saving the modified configuration. The new configuration writes
over the existing one.
6. Print a copy of this newest configuration and store it in a safe place. Refer
to “Printing A Configuration” on page 93.
Delete Config.
1*
Deleting
Configuration
Delete Config.
X
*
To Next Page
Loading...
