Prodigit 3350F Series - Page 53

44 PRODIGIT
 ISTAR: setting the start current point, The LCD display shows 「OCP」on left 5
digit LCD display, Middle 5 digit LCD display「ISTAR」,right 5 digit LCD display
Setting value, the unit is "A".
The setting range is 0.00A to the full scale of the CC mode specification. The setting
Is by rotating the setting knob.
 ISTEP: setting the increment step current point, The LCD display shows 「OCP」on
left 5 digit LCD display, Middle 5 digit LCD display「ISTEP」,right 5 digit LCD
Display setting value, the unit is "A".
The setting range is 0.01A to the full scale of the CC mode specification. The setting
Is by rotating the setting knob.