3350F Series Operation Manual 47
PSTAR: setting the start power, The LCD display shows 「OPP」on left 5 digit
LCD display, Middle 5 digit LCD display「PSTAR」,right 5 digit LCD display setting
Value, the unit is "W", the setting range is 0.0W to the full scale of the CP mode
Specification. The setting is by rotating the setting knob.
PSTEP: setting the increment step power, The LCD display shows 「OPP」on left
5 digit LCD display, Middle 5 digit LCD display「PSTEP」,right 5 digit LCD display
Setting value, the unit is "W", the setting range is 0.0W to the full scale of the CP
Mode specification. The setting is by rotating the setting knob.