ProMinent
®
Page 39
Accessories
15 Accessories
CAUTION
The fitting and installing of ProMinent
®
dosing pumps using parts from other
suppliers which have not been tested and recommended by ProMinent is
inadmissible and can result in harm to personnel and equipment, for which no
liability will be accepted.
Level switch
2-stage with 2m connection cable
Fault indicating relay
To signal faults
Fault indicating and pacing relay
For timing other equipment and for indicating faults.
Signal cable
Universal signal cable: 5 core / 2.5 and 10 m
External contact cable: 2 core / 2.5 and 10 m
Foot valves
With suction filter and non-return valve for connection at the end of the suction tubing.
Discharge valve
With spring-loaded non-return valve for dosing into open or closed systems and for connecting
discharge tubing.
Discharge lances
For dosing into large pipes and to prevent blockage when dosing crystallising substances.
Back pressure valves
For precision dosing when operating pressure is low or as a relief valve.
Accumulator without diaphragm
For reducing pulsation, e.g. with long dosing lines.
Dosing monitors
For monitoring dosing. After pre-set number of failed strokes the error message displays and
the dosing pump switches off.
Suction lances
With foot valve and float switch for disposable drums or chemical feed containers
Chemical feed container
To contain 35 to 1000 litres with lockable screw top and necessary accessories.
Manual/electronic stirrers
For mixing and batching of feed solutions.
Bracket
For stable pump mounting.
To Next Page
Loading...
Need help?
General
