Chapter 4 Award BIOS Setup
Prox-1635LF USER
′
S MANUAL
Page: 4-15
2. AGP Mode
This item allows you to set the AGP mode.
3. AGP Driving Control
This item allows you to adjust the AGP driving force. Choose
Manual to key in an AGP Driving Value in the next selection. This
field is recommended to set in Auto for avoiding any error in your
system.
4. AGP Driving Value
This item allows you to adjust the AGP driving force.
5. AGP Fast Write
This item will enable the AGP model into fast write mode.
6. AGP Master 1 WS Write
When Enabled, writes to the AGP (Accelerated Graphics Port) are
executed with one wait state.
7. AGP Master 1 WS Read
When Enabled, reads to the AGP (Accelerated Graphics Port) are
executed with one wait state.
CPU & PCI BUS CONTROL:
The options for these items are found in its sub menu. By pressing the
<ENTER> key, you are prompt to enter the sub menu of the detailed options
as shown below:
Phoenix – Award CMOS Setup Utility
CPU & PCI Bus Control
Item Help
CPU to PCI Write Buffer
PCI Master 0 WS Write
PCI Delay Transaction
[Enabled]
[Enabled]
[Disabled]
Menu Level ►
↑↓→←:Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
To Next Page
Loading...
Need help?
General
