Playing Media on Data CDs
34
Controlling Video File Playback
When video is playing, press to pause it. Press to resume playback.
Press to stop playback and return to the menu.
Press to return to the previous file. Press to skip to the next file.
Press to fast reverse playback. Press to fast forward playback. Repeated presses cycle
through the speed options: ×2, ×4, ×8, ×16, ×32, and normal speed.
Press to play the video at a slower speed. Repeated presses cycle through the speed options:
×1/2, ×1/4, ×1/8, and normal speed.
Press to return to normal play mode or to start playing the disc again when it is stopped.
Searching to a Location
Using the SEARCH button, you can search to a file in the current directory or a time in the
current file (audio/video files).
To search to a location:
1. Press SEARCH once to search to a file, twice to search to a time in the current file (audio/
video files).
2. Enter the desired file number or time using the remote keypad. The location you enter will
display on the menu as you enter it.
3. Press ENTER.
Programming Playback Sequence
The navigation menu that appears when you first insert a data CD allows you to program
playback sequence.
To program playback sequence:
1. Use and to select a file, then press
ADD/CLEAR to add it to the playlist.
2. Repeat until all desired files have been added
to the playlist.
3. Press to move to the Program column.
4. Select a playlist item and press ENTER to begin
playing back the playlist from that point.
To remove an item from the playlist, select it and press ADD/CLEAR.
File Play - STOP
FILES&DIRECTORY
FOLDER 1
FOLDER 2
AUDIO 1.MP3
AUDIO 2.MP3
IMAGE 1.JPG
IMAGE 2.JPG
VIDEO 1.MPG
VIDEO 2.MPG
1
2
3
4
5
6
7
8
FAVORITE/PROGRAM
OMPDDVR100.book Page 34 Monday, September 19, 2005 8:35 AM
To Next Page
Loading...
Need help?
General