Proxxon PD 400 CNC User Manual

18 EC Declaration of Conformity
41 of 54
18. EC Declaration of Conformity
We herewith declare in sole responsibility that the following designated product in the
design which we have marketed complies with the principle safety and health
requirements of the applicable EU Directive.
This declaration shall lose its validity if unauthorised changes were made to the system.
Manufacturer: Proxxon GmbH
Im Spanische n
D-54518 Niersbach/Eifel, Germany
Product designation CNC Lathe
Type designation PD 400 CNC
Article number 24500
EU Low-voltage directive 73/23/EWG
93/68/EWG
73/23/EEC
93/68/EEC
Angewandte Normen: DIN EN 61029-1 / 12.2003
Applicable standards
EU-EMV-Richtlinie 89/336/EWG
EC EMC Directive 89/336/EEC
Angewandte Normen: DIN EN 55014-1 / 09.2003
Applicable standards DIN EN 55014-2 / 08.2002
DIN EN 61000-3-2 / 10.2006
DIN EN 61000-3-3 / 06.2006
EU-Maschinenrichtlinie 2006/42/EG
EC Machinery Directive 2006/42/EC
Angewandte Normen: DIN EN 61029-1 / 12.2003
Applicable standards
Jörg Wagner
08.12.06

Proxxon PD 400 CNC Specifications

General

Brand	Proxxon
Model	PD 400 CNC
Category	Tools
Language	English