Prusa Research CORE ONE - STEP 2 Tools Included in the Package

1. Introduction
Prusa CORE One (assembled) 5
STEP 2 Tools included in the package
Your Prusa CORE One package includes all the tools for printer operation and
maintenance:
Phillips (PH2) screwdriver (1x)
Needle-nose pliers (1x)
Wrench size 13 mm (1x)
Universal wrench (1x)
Allen key set 1.5 mm - 3.0 mm
Torx key set T6 - T10
You will come across the tool pack during unpacking the printer, we will let you
know.
For this guide, you will only need the 2.5 mm Allen key.