Prusa i3 MK3 - Page 44

10.4  Slic3r Prusa Edition
PrusaControl is built on top of the Slic3r Prusa Edition and hides all the unnecessary clutter
you would have if all the settings were exposed. If you choose to create your own specific
print settings, or tweak the material settings heavily, you can use Slic3r PE directly.
 
Pict.   27   -   Slic3r   interface
1. The Add button loads models into Slic3r.
2. Delete and Delete All buttons remove the model(s) from Slic3r.
3. Opens the detailed settings of print, filament and printer.
4. When the model is ready for print, this button generates the .gcode file.
5. Quality / Speed setting of a print
6. Material selection
7. Printer selection
8. Right-click on model opens the menu with rotate, resize and other options
9. Type of model preview
10. Model preview
 
44