Pylontech PowerCube-X1-V2

17
3. Installation
Please check every installation step in detail at <Annex 1:
Installation and System Turn ON Progress List> during the install.
3.1. Installation tools
The following tools are required to install the battery pack:
Wire Cutter
Crimping Modular Plier
Cable Ties
Screw Driver Set
Electric Screw Driver
Adjustable Wrench
Sleeve Piece
1000VDC Multimeter
Note
Use properly insulated tools to prevent accidental electric shock
or short circuits.
If insulated tools are not available, cover the entire exposed metal
surfaces with available insulated alternatives, except their tips,