20
3.3. Working Environments
3.3.1. Cleaning
The battery system has high voltage connectors. The clean
condition will cause the isolation characteristic of the
system.
Before installation and system working must clean the dust
and iron scurf to keep the environments cleaning. And the
environment must have certain anti-dust ability.
The system after long term running must check the humidity
and dust cover or not. If heavy dust cover with high
humidity on the system should stop the system running and
make clean specially for the high voltage connectors.
Danger: the power cables and plugs still have high voltage
DC power from serial connected battery modules (battery
module can’t be turned off), must be careful to handle the
Power Plugs.
3.3.2. Temperature
PowerCube-X1/X2-V2 system working temperature range: 0℃ ～ 50℃;
Optimum temperature: 18℃～28℃.
Caution: Out of the working temperature range may cause
the battery reduces the cycle of life even cause the battery
system over / low temperature alarm or protection.
3.3.3. Cooling System
The environment must be equipped with cooling system.
Caution: Out of the working temperature range may cause
reduction of the cycle of life of the battery even trigger
the battery system over / low temperature alarm or
protection.
3.3.4. Heating System
The environment must be equipped with heating system. If the
environment is lower than 0°C, the heating system at first must be
turned on.
Caution: Out of the working temperature range may cause
reduction of the cycle of life of the battery even trigger
the battery system over / low temperature alarm or
protection.
3.3.5. Grounding System
Before the battery installation be sure the grounding point
of the basement is stable and reliable. If the battery
system is installed in an independent equipment cabin (e.g.
container), make sure the grounding of the cabin is stable
To Next Page
Loading...
Need help?
General
