46
Caution: If not follow the above instructions for long
term store the battery, the cycle life will have relative
heavily reduction.
6.2. Capacity expansion
A new battery module can be added onto an existing system at any
time. Please make sure the existing system is being fully charged
before added on a new module. In a serial connection system, the
new module, even with a higher SOH, shall follow the system worst
SOH condition module to perform.
7. Shipment
Single module is pre-charged to ~55%SOC, or according to customer
requirement, before the shipment. The remaining battery capacity
after delivered on-site, is determined by the storage time and
condition.
1. The battery modules should meet the UN38.3 certificate standard.
2. In particular, local rules and policy for the product
transportation shall be complied with. For more details, please
enquiry the Safety Data Sheet (SDS) from Pylontech for more
To Next Page
Loading...
Need help?
General
