Pylontech PowerCube-X1-V2

49
operation. It will begin from lowest voltage
battery string to do the parallel operation
during the charging.
If the status LED of BMS turns to green, it
means this battery string is in parallel
operation.
charging
progress.
☐
13
If the system need black start,
Refer to
chapter 3.7.
Annex 2: System Turn OFF Progress List
Tick
after
completio
n
No.
Item
Remark
☐
1
Soft-off the PCS through PCS’s control panel.
Refer to
chapter 3.8.
☐
2
Turn off the switch between PCS and this
battery string (PowerCube-X1/X2-V2), or turn
off the power switch of PCS, to make sure no
current through this battery string.
Refer to
chapter 3.8
☐
3
Turn off all the “Power Switch” of the Control
Module.
Refer to
chapter 3.8